Back

2020 John Deere Draper Platforms 740FD

MoreLess
Limited Time Offer!

Selling Price -$110,600.00
No Images Available

Selling Price -

$110,600.00

HD Certified Pre-Owned
  • 40' FLEX DRAPER PLATFORM
  • ADAPTER COMPATIBLE W/ JD S780
  • LARGE UCA
  • SPLIT PICKUP REEL
  • PICKUP REEL
  • HYD FORE & AFT
  • HYD TILT
  • DOUBLE KNIFE DRIVE
  • AUTO HEIGHT CONTROL
  • POLY DIVIDERS
  • FLIP OVER REEL
  • WARRANTY:SILVER
  • ***ONLY AVAILABLE FOR SALE WITH COMBINE PURCHASE***
  • 2020
  • John Deere
  • Draper Platforms
  • 740FD
  • Combines
  • Knife: 490 cycles/min | Pickup reel: 6-70 rpm | Side belts: variable up to 228 m/min (748 fpm) / Center belts: 211 m/min (692 fpm) | Feed drum: 240 rpm
  • Pickup reel Diameter: 106.7 cm (42 in.) | Reel lift Cylinder range: 185 mm (7.3 in.) / Total range: 185 mm | Reel fore and aft Cylinder range: 359 mm (14.1 in.) / total range: 499 mm (19.6 in.) | Feed drum diameter: 414 mm (16 in.) | Feed drum fingers Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm (0.625 in.) | Finger reach: 152 mm (6 in) | Cutterbar vertical flex: 154 mm (6 in.)
  • Platform: 12.9 m (42.4 ft)
  • Side belts: 101.6 cm (40 in.) | Center belts: 177.6 cm (70 in.)
  • Clean Cleats: 19.05 mm (0.75 in.)
  • hydraulic, maximum tilt 9 degree (angle)
  • Overall operating With dividers: 2.74 m (9 ft)
  • Field position: 13.3 m (43.7 ft)
  • 12.19 m (40 ft)
  • Approximate: 4,125 kg (9,095 lb)
  • Platform type: Flex cutterbar draper | Cutterbar type: Straight-line knife drive system | Knife drive: dual knife | Number of slats: Six bat poly base | Number of fingers: 21 | Auger finger platform: Triple chevron, retracting | Height / Speed control: Hydraulic
  • Nylon
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $110,600.00
  • MONTMARTRE
  • Pre-Owned
  • 134190
  • 2020
  • John Deere
  • Draper Platforms 740FD
  • 1H0740FDAL0810524
  • Available
  • Side belts: 101.6 cm (40 in.) | Center belts: 177.6 cm (70 in.)
  • Clean Cleats: 19.05 mm (0.75 in.)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.