2024 CLINICS
If you have any questions, please reach out to your local Integrated Solutions rep, or salesman.
Please check back this summer for information about our 2024 combine clinics!
-
2021 Virtual Combine Clinic Resources
Wayne and Tim discuss some things we learned in 2020 and some expectations for the 2021 harvest.
-
Pre-Harvest Combine readiness and walk-around, S Series combines
Critical components to check before you go to the field and South Country’s suggestions for combine setup.
-
Sieve and Chaffer Calibration
Is your display showing actual sieve/chaffer position? Probably not. Here’s how to check it and fix it.
-
Mass Flow Vibration Calibration
Yield Sensor wrong? Do this 5 minute calibration when you change crops.
-
Moisture Sensor Calibration (S-series combines)
Yield Sensor still wrong? Do this calibration at the start of the season. MY19 and older procedure plus the MY20 and newer procedure.
-
Hybrid/Standard Mode S700 Combines
How to change modes in the Gen 4 display, MY20 update.
-
Header Calibrations, S600 Series combine (2630 display)
The header calibrations that should be on your checklist, before you hit the field.
-
Header Calibrations, S700 Series combine (Gen 4 display)
The header calibrations that should be on your checklist, before you hit the field. Pick-up header won’t calibrate? Wayne shows you where the manual is lying to you. Calibrate the Fore/Aft tilt, both S600/S700 series (sorry, we missed this one for the S600, but it’s the same procedure).
-
Header Calibration with a MacDon
We show a common fault that prevents a proper MacDon calibration.
-
South Country Harvest App
We show a common fault that prevents a proper MacDon calibration.
-
MacDon Float
Critical seasonal check on your MacDon.
-
MacDon Balance
Critical seasonal check on your MacDon.